PUSH-G Series Gas Generator Sets

　　 PUSH-G Series Gas Generator Sets

　　◆ Rated power: 900kW–1500kW, speed: 1000 rpm.

　　◆ Compact structure, high integration, high power generation efficiency, and stable operation.

　　◆ Low lubricant consumption, low emissions, long major overhaul intervals, and easy maintenance.

　　◆ Widely used in various gas applications (such as coalbed methane, natural gas, biogas, straw gas, and associated gas from oilfields, etc.).

　　◆ Suitable for wastewater treatment plants, landfills, aquaculture, coal mines, oilfields, and urban distributed energy stations.

　　Basic boundary requirements for the gas source:

　　◆ Gas methane content: Natural gas ≥ 90%, biogas ≥ 45%, coalbed methane ≥ 8%.

　　◆ Inlet gas pressure at the gas inlet (1 meter upstream of the unit): 5 kPa - 10 kPa.

　　◆ Relative humidity ≤ 80%, rate of change in gas methane concentration ≤ 2%/min, and rate of change in gas pressure before entering the machine ≤ 1 kPa/min.

PUSH-GT Series Natural Gas Generator Set Technical Data Sheet

　　[1] The rated power conditions are as follows: altitude 0–500 m, atmospheric pressure 100 kPa, ambient temperature 25℃, relative humidity ≤30%; unit speed 1000 rpm; power factor 0.8. The actual operating power at the site shall be corrected according to the actual conditions such as site altitude, atmospheric pressure, ambient temperature, and humidity, in accordance with NB/T42017.

　　[2] This parameter refers to test data obtained under the rated operating conditions on the company’s test bench; the data and base power represent the engine’s rated power.

　　[3] The electrical efficiency of the unit may be adjusted based on factors such as different gas source conditions and site environmental factors.

　　[4] The overall efficiency varies depending on the specific unit configuration and operating conditions.

PUSH-GZ Series Biogas Generator Set Technical Specification Table

　　[1] The rated power conditions are as follows: methane concentration ≥ 60%; altitude 0–500 m, atmospheric pressure 100 kPa, ambient temperature 25℃, relative humidity ≤ 30%; unit speed 1000 rpm, power factor 0.8. The actual operating power on-site shall be corrected according to the actual site conditions—including altitude, atmospheric pressure, ambient temperature, and humidity—following the provisions of NB/T 42017.

　　[2] This parameter refers to test data obtained under the rated operating conditions on the company’s test bench; the data and base power represent the engine’s rated power.

　　[3] The electrical efficiency of the unit may be adjusted based on factors such as different gas source conditions and site environmental factors.

　　[4] The overall efficiency varies depending on the H2S content of the gas source, the configuration of the unit, and the operating conditions.

　　 Biogas Power Generation Process Flowchart

PUSH-GW Series Gas Generator Set Technical Specifications

　　[1] The rated power conditions are as follows: methane concentration ≥ 8%; altitude 0–500 m, atmospheric pressure 100 kPa, ambient temperature 25℃, relative humidity ≤ 30%; generator set speed 1000 rpm, power factor 0.8. The actual operating power at the site shall be corrected according to the actual conditions such as site altitude, atmospheric pressure, ambient temperature, and humidity, in accordance with NB/T 42017.

　　[2] This parameter refers to test data obtained under the rated operating conditions on the company’s test bench; the data and base power represent the engine’s rated power.

　　[3] The electrical efficiency of the unit may be adjusted based on factors such as different gas source conditions and site environmental factors.

　　[4] The overall efficiency varies depending on the specific unit configuration and operating conditions.

　　Waste Gas Power Generation Process Flowchart